Tips For Fixing Kitchenaid Superba Error Codes

In some cases, your system may display an error code indicating kitchenaid Superba error codes. There can be many reasons for this error to occur.

F2-E0 – The touchpad (keyboard) is shorted. Check the connection between the touch yoga mat (keyboard) and control board (watch) if you want to make sure it is secure. Select the Cancel option and wait 60 seconds. If the error code reappears, replace the touchpad or touch the training pad and control board (clock) if they are all assemblies.

These error code explanations will help you diagnose a problem with your KitchenAid wall-mounted oven. For repair assistance, visit Direct Parts Help frequently, which may include assistance with repairing surface ovens, other major appliances, playground and garden equipment, and garage openings.thresholds, vacuum cleaners, etc. Search by model number to find a complete database of spare parts for this wall-mounted stove.

Error code

Status

kitchenaid superba error codes

Do-It-Yourself Tips

F1/E0

User Screen Error

Check/Correct

Power off this oven and replace the main interface.

Possible details

User Interface

F1/E1

Electrical failure of the electronic oven control board

How do I clear the error code on my KitchenAid oven?

Turn off the entire unit by turning off the circuit breaker(s) or fuse(s) for one (1) minute.Turn on my device by turning the circuit breaker(s) plus the fuse(s),Monitor the Product for one (1) minute to ensure that these error codes rarely occur.

Check/Correct

Disconnect the power supply caused by the oven and replace the electronic control board of the oven.

Possible details

Electronic control panel for the hob

F2/E0

User fan not responding electrically

Check/Correct

Turn off the power to the oven. Open the control panel and reconnect loose specific wire connections. Replace damaged wireNo visitor interface wires if in doubt. If the harness connections are OK, replace the aggressive interface.

Possible details

User connection program, wiring harness

F2/E1

Idle button in a user-friendly interface

Check/Correct

Power off specific oven and replace user interface.

Possible details

User Interface

F3/E0

Oven top temperature sensor defective

Check/Correct

Turn off the power by turning on the oven. Collect all loose wires on the top oven temperature sensor. The upper oven temperature sensor is currently being replaced, use the cable if it is damaged. Install the protection for the upper oven temperature sensor using a volt/ohmmeter. If resistance is not 1080 ohms at 70 F Replace the oven’s upper temperature sensor. If at the moment the sensor and wiring harness are intactohms are OK, replace the electronic control board of the model.

Help

Possible details

Upper oven temperature sensor, wiring harness, electronic oven control board

F3/E1

The lower oven temperature sensor is electrically defective

Check/Correct

Turn off the power to the oven. Connect all wires to the oven temperature sensor. Usually replace the lower oven temperature sensor timing harness if it is damaged. Measure the lower oven temperature sensor and generate resistance with a volt/ohmmeter. If the 70f resistor is not 1080 ohms, essentially replace the oven temperature sensor. If the sensor type and wiring harness are OK, replace the range control board.

Help

Possible details

Reduce the hob temperature sensor, wiring harness, oven electronic control board

F3/E3

The meat sensor must be defective

How do I reset my KitchenAid Superba oven?

Turn off the structure by turning off some circuit breakers for a designated person (1) minute.Turn on the device by removing the circuit breaker(s).Start a cooking cycle.Monitor the oven for one (1) minute so that the error code does not appear again.Check oven operation.

CheckErase/Correct

Turn off the power to these ovens. Reconnect the disconnected wires to the meat probe power socket. Replace the multi-probe connector harness if damaged. Replace the meat probe socket if it is damaged. If the meat skewer connection and outlet wiring harness are OK, replace the meat skewer. If the problem persists, replace the oven electronic control board.

Possible details

Meat probe, probe socket, wiring harness, oven lower electronics

F5/E0

The oven door switch does not have to be the same as the oven door lock switch

Check/Correct

Turn off the power to the main oven. Short the loose wires on the oven door and connect them to the freezer door assembly. Replace the seat belt cable if damaged. Replace the oven door switch or oven mailbox lock if the assembly is damaged. If the oven door switch, lock Oven door assemblies and wiring harness are in good condition, replace specific oven control board.

kitchenaid superba error codes

Possible details

Oven switch, oven door lock assembly, wiring harness, oven control board electronics

F5/E1

Can’t open oven door lock

Check/Correct

Turn off the power to the oven. Connect any loose wires to the oven portal latch assembly. Replace the wiring harness assembly if it is damaged. If the wiring is OK, replace the oven door latch assembly part. If the problem persists, replace most of the oven’s electronic control board.

How do I know if my KitchenAid oven is broken?

When this happens, KitchenAid has made it clear that you can fix them right away – and you can turn to KitchenAid’s oven scan mode or the user manual for help. In the event of a problem, the oven display usually shows error messages.

Possible details

Assembly of the outer oven door, use of locking cables, electronic oven control board

F6/E0

No letter between the user interface and the electronic control board of the oven

What do the error codes mean on a KitchenAid oven?

KitchenAid oven error codes. If there is a problem with the KitchenAid oven itself, the error prefix will appear on the timer as soon as the problem is registered in the oven crash. Each code corresponds toThere is a new specific type of fault. Most of them can be solved by turning off the power for a specified minute and then restarting it.

Check/Correct

Turn off the power to the oven. Connect Everythingloose wires to the electronic control boards of the oven and the user interface. Replace wiring harness if dangerous. If the wiring is ok, replace the user interface. If the problem persists, replace the oven electronic control board.

Possible details

User interface, wiring harness, electronic oven control board

F6/E1

Oven too hot on Bake or Grill

Check/Correct

If an essential item heats up when the oven is off (indicating a metal cabinet), it is. However, if it overheats during use, unplug the electric hob and/or leave the oven at room temperature. Replace the grill or grill element if it is visibly damaged. If they are in good condition, replace the precision electronics on the oven control board. Share

Oven

Outdoor weather forecast possible, oven electronic control panel

F6/E2

Hot oven in cleaning mode

Check/Correct

If a new working element gets hot when the pot is turned off (indicating a reduction in the metal casing), adjust it. If it overheats completely during use, turn off the power to the oven and allow the oven to warm up to room temperature. Replace the grill or grill element if there is visible damage. If the operation is OK, replace the electronic control board of the oven.

Possible details

Oven equipment, electronic oven control board

F6/E4

Incompatible user interface and electronic oven stuck on board

Check/Correct

The wrong user interface may have been installed during the repair, possibly the oven’s electronic control board. Replace the incompatible part with the marked part.

Possible details

Electronic map of oven dominance, userEnglish interface

F6/E5

What is the model number of my KitchenAid superba oven?

Model Bit – KEBS107DWH7; The serial number is often the KitchenAid Superba XJI4 oven. Model number – KEBS107DWH7; Serial number XJI401375. I only have two KitchenAid ovens, but I mostly use one.

Invalid e-governance smart card